MKS Servos DS1210 Metal Gear Standard Digital Servo [MKS-DS1210]

Description

This is the MKS DS1210 Metal Gear Standard Digital Servo. The DS1210 is a low cost water resistant, metal gear servo that is well suited to surface and aircraft applications, and is an excellent choice as an upgrade for RTR and RTF models.
Tech Note:
Do not exceed 5.8V, as outlined on manufacturer specifications. Failure to follow this will result in premature failure of this servo!
DS1210 Specifications:
Dead Band:
0.002ms (Default)
Control System:
+Pulse Width Control
Working Frequency:
120Hz
(RX) Required Pulse:
3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage:
4.8~5.8V DC
Operating Temperature Range:
-10 to + 60 Degree C
Operating Speed (4.8V):
0.15 sec/60° degrees at no load
Operating Speed (5.8V):
0.12 sec/60° degrees at no load
Stall Torque (4.8V):
111.79 oz/in (8.05 kg-cm)
Stall Torque (5.8V):
138.87 oz/in (10 kg-cm)
360° Modifiable:
NO
Motor Type:
DC Motor
Potentiometer Drive:
Direct Drive
Driver Type:
FET
Bearing Type:
Dual Ball Bearings
Gear Type:
Metal gear
Programmable:
NO
Connector Wire Length:
15.0 cm (5.9 in)
Dimensions:
40x20x40.30mm
Weight:
56g (1.97 oz)
About Us
|
View Store